S & R Optic GmbH
Enabling Crystal Optics Solutions

Other Birefringent Crystal Components

Polarization Rotators (Crystal Quartz Rotators, Z-Cut)  

Waveplates can be used to rotate the direction of linear polarization by an angle which is determined by the angle between the polarization vector and the optical axis of the waveplate: The linear polarization is rotated by exactly twice this angle (more general: it is flipped at the optical axis). This also means that different directions of linear polarization will be rotated by different angles with any specific setting of the waveplate.

In contrast, Z-cut quartz rotators will rotate any direction of linear polarization by the same angle. This angle, however, is wavelength dependent.

Wavelength

248 nm – 1064 nm

Rotation Values

45° and 90° @ design wavelength

Rotation Tolerance

+/- ≤ 0.5° @ design wavelength

Thickness

1.3 – 16 mm

Diameter

10 mm - 30 mm (>30 mm on request)

Parallelism

≤ 0.5 arc sec.

Surface Quality

10-5 scratch-dig

Damage Threshold, cw

1 MW/cm² cw @ 1064 nm

Depolarizers: 

Types

Cornu, Lyot, Hanle

Beam Displacers, Calcite Rhombs

Dimensions

10 mm - 30 mm

Other Birefringent Crystal Components

250 nm – 2700 nm


Compensator Plates & Wedges

Compensator plates and wedges made of quartz and mica are useful for determination of the character of birefringence and of optical path differences in polarized light.

Plate Compensators

The crystal plates are cemented between two glass flats (2 – 3.5 mm thick). They are used as compensators in polarizing devices like microscopes and optical stress analyzers. Flatness of glass flats is approximately 1 lambda, parallelism ≤ 3 minutes. These plate compensators are 1st order (1 lambda) in red light (550 nm).


Mica Step Compensator – Fedorov type

For comparative measurement we recommend our Mica Step Compensators.

The standard types have 6 gradations from 10 - 50 nm or from 30 - 120 nm. The individual gradations are measured in a half-shade compensator and marked accordingly.

The compensator is used with white light. It can be used for comparative measurement in the workshop.

For example:

45

60

70

80

115

130

nm







In testing for strains it is possible in practice to use objects – such as bottles, vials, tubes – that have been accepted by both the manufacturer and purchaser as reference samples in terms of tolerances. With complex hollow glass types, reflections and glare can make testing more difficult and may result in incorrect findings. The test should therefore be carried out in a cuvette with immersion liquid.

AR-coatings and mounts available upon request.